I am looking for information on side car fixings for 1927 Model 7 600SV I have just found a sidecar and now looking to attach to the bike , the fittings I have are ;_
rear lower fixing is a ball joint bolted though rear frame by rear wheel
middle fixing is a bolt under frame by seat
front top is a clamp on the frame on down tube and tube under tank
I am told that there should be a forth lower down at the front but cant see any connection unless it fits to the foot board fixings would anyone who has one could they send me a picture of the clamp so I can get an idea of what I am seeking or if I am lucky does anyone have anything
Also looking for information on hood and screen fixings
To help I am going to make some spare wheel fixings as I have QD if anyone wants anything I others
thanks
john
I would have thought that the lower front fitting should go to one of the frame/engine plate bolts.John
Yes I totally agree but there is no sign of any other clamp on the chassis and if someone has a sidecar if they have on a picture would give me a good chance of finding what I require
thanks anyway
This photo is from 1924, might help..John
It looks like there was not a front lower fitting on the later, after 1930, bikes
thanks
does seem there is not one in the later picture what I think I need is a picture of someone's bike and sidecar
possibly the larger front engine stud nut would have been replaced with half a clevis joint?
Yes ,that would be perfect..
Quote from: kbryt on December 16, 2017, 10:50:32 AM
possibly the larger front engine stud nut would have been replaced with half a clevis joint?
That's what I was thinking of. We had that on my brothers bike back in the 60's