Flange Gaskets

Started by Gaz_95L, May 15, 2013, 10:17:03 PM

Previous topic - Next topic

0 Members and 1 Guest are viewing this topic.

shorrog

Hi Gary
I have just purchased a gasket set from Amal for a 275 carb. I don't know if this is similar to yours but  it comes with a flange gasket, central hole is 0.871 in, bolt holes are approx 2in between centers, overall width is 1.621 in, and overall length 2.627in, thickness is 0.063in
The gasket set part no is RK4/5 274/275 Gasket set.
Hope that helps
Graham

phutton

I just used a silicon instant gasket from a tube - I know it's not original, but it works ok on my 95 and no one will ever notice!

Paul

Gaz_95L

Hi, I have a Amal 10TT32 carb and need a flange gasket, but not sure where I can purchase one from. I've tried the Amal Carburettor Company but they don't list anything for this carb.

I thought about just buying a sheet of gasket paper and making one myself, but a) I'm not sure where I can purchase gasket paper from, and b) how thick it should be.

Any help / advice would be much appreciated.

Gary.