Text only | Text with Images

The Marston Sunbeam Club & Register Forum

General Category => Technical Discussion Forum => Topic started by: singleminded on November 05, 2018, 06:28:33 PM

Title: Valve collets/keepers
Post by: singleminded on November 05, 2018, 06:28:33 PM
What material would be best for valve collets?
I feel that if they are too hard they may damage the valves..John
Title: Re: Valve collets/keepers
Post by: shorrog on November 05, 2018, 07:12:22 PM
This site uses EN24T steel http://www.med-engineering.co.uk/products/cylinder-head/springs-caps/med-9-32-std-collet-set
Graham
Text only | Text with Images