White smoke from exhaust from burning oil

Started by Fellwalker, November 06, 2026, 06:40:26 AM

Previous topic - Next topic

0 Members and 3 Guests are viewing this topic.

Thomas

Ok, an already affected piston/barrel is a reasonable cause for your problem. Aa far as I know a 60thou oversize piston is the maximum. A new standard one and a liner are in order. The latter is a simple task for any motor workshop as I've learned with my BSA (you don't need a new barrel). Pistons are a more delicate and lasting issue and our shop doesn't have it. I don't know alternative pistons but recently I've been at a specialized workshop (although in Germany): https://www.marston-sunbeam.org/sunbeamForum/index.php?topic=1356.0 That will be my silver bullet as soon as I need a new piston.
Cheers, Thomas
1946 BSA C11
1937 Sunbeam Model 9
... and a scratched Hyundai
(MSCR member)

Fellwalker

Thanks Thomas, unfortunately it appears the scraper ring is very tight upon the groove and a small gouge has been inflicted in the bore.  The piston is +60 thou.  I assume that's as big as they come?  Are there other pistons that could work and fit?  Has anyone looked at new cylinder liners?  Are barrels available?

Thomas

I would start with the easy part and look for wet sumping (although I wonder why it should suddenly appear). Check the ball valve at the crankcase.
1946 BSA C11
1937 Sunbeam Model 9
... and a scratched Hyundai
(MSCR member)

Fellwalker

My 1936 Model 8 has started polluting the environment with lots of white smoke from the exhaust from burning oil.  We're going to take the head off and have a look, but other than valve guides and piston rings, are there any other potential causes we should look for?