is this really sunbeam 1924 sv or selfmade?

Started by hubii, July 29, 2019, 10:13:23 AM

Previous topic - Next topic

0 Members and 1 Guest are viewing this topic.

hubii

Thanks Graham,
the engine plates are O.K. I mean - unclear to me is the footrest bracket - the bulky, thick steel rod ... is the original Sunbeam - I can't believe...

Mathias

shorrog

I cant tell a 100% but it looks like the rear pair of engine plates that are similar to those that we put on to the shop just recently. If you look at part 34374 there is a PDF diagram that has the measurements. They were measured from an original and if you print out the PDF at 100% you can get a good idea of the dimensions.
I have also attached a spread sheet put together by Paul Hutton that lists the models and part numbers for the plates.
Graham

hubii

Hi Guys,

it looks like a professional selfmade-part... also diameter of 31,7mm (1 1/4 Inch) is big ... at the ends the footrest are mounted...

have anybody a photo with correct measures?

greetinx /hubii