Print Page - is this really sunbeam 1924 sv or selfmade?

Title: is this really sunbeam 1924 sv or selfmade?
Post by: hubii on July 29, 2019, 10:13:23 AM

Hi Guys,

it looks like a professional selfmade-part... also diameter of 31,7mm (1 1/4 Inch) is big ... at the ends the footrest are mounted...

have anybody a photo with correct measures?

greetinx /hubii

Title: Re: is this really sunbeam 1924 sv or selfmade?
Post by: shorrog on July 30, 2019, 11:02:58 AM

I cant tell a 100% but it looks like the rear pair of engine plates that are similar to those that we put on to the shop just recently. If you look at part 34374 there is a PDF diagram that has the measurements. They were measured from an original and if you print out the PDF at 100% you can get a good idea of the dimensions.
I have also attached a spread sheet put together by Paul Hutton that lists the models and part numbers for the plates.
Graham

Title: Re: is this really sunbeam 1924 sv or selfmade?
Post by: hubii on July 30, 2019, 11:20:55 AM

Thanks Graham,
the engine plates are O.K. I mean - unclear to me is the footrest bracket - the bulky, thick steel rod ... is the original Sunbeam - I can't believe...

Mathias

The Marston Sunbeam Club & Register Forum

General Category => Technical Discussion Forum => Topic started by: hubii on July 29, 2019, 10:13:23 AM