aluminium welding#2 it never rains but it pours

Started by kbryt, August 26, 2018, 05:46:22 PM

Previous topic - Next topic

0 Members and 1 Guest are viewing this topic.

kbryt

So I settle down to clean up the cases prior to assembly, and  put cams and followers in to see whats what re bushes etc.

I notice that  the tappet feet do not contact the base of  the cam by  several MM, that explains the  loud clatter  I had since cams were  refaced, so  the only way to solve that was to take a bit off the crankcase guides so the stems can sit lower.

Put it all on the gas ring, blow me if I did not spot two more cracks, one under the timing chest, the other by the tappet guide.

Looks like tomorrow I'll bite the bullet and use that wonder alloy solder I bought at Netley the other year;at least they are only small cracks.

Seems I got sub standard casting on my model 1 :'(