[singleminded]

Hi graham..I make the spare one I have 9/16" long..The other dimensions appear the same. On my 9A I cleared the thread right through and you can fit a much longer screw if necessary, i made that one and it is 1 1/16" from the shoulder to the end of the thread..

[shorrog]

Hi folks, the spares team are currently looking at getting the screw that holds the hand gear lever to the bike manufactured. However on measuring a couple of screws from model 9s we have ended up with different dimensions.
If you have such a bike is their any chance you could take a photo and measure the screw.
The one on my bike 1930 model 9 is as per the  pdf but we think the length is wrong and also the slot may be too small. 


Any help would be greatly appreciated.
Graham