Ultrasonic cleaner

Started by Peter 100, December 05, 2021, 06:08:04 PM

Previous topic - Next topic

0 Members and 2 Guests are viewing this topic.

phutton

It is not clear from the parts list whether or not there is a seal. There are two types of selector segment shaft listed - one with a taper spline for the lever (type A) and one for a parallel spline (type B). If you have the taper spline, there should be a gland nut and sealing washer. The other question is how much oil is in the box? It should be no more than 8 fl.oz - about 16 tablespoons. Any more than that, and it will cause a problem on the gearchange, and will leak out through the gear selector segment shaft.

P.

Peter 100

Graham
looking on utube they seem to work quite well , and ranging from 40-100 pounds they might be a useful bit of kit.
Peter
1934 Sunbeam model 9 🏍️
1946 Austin 10 🚙

shorrog

Hi Peter
I have not used one but everything I have read says they are very good.
Graham

Peter 100

Hello to all
Has anybody used an ultrasonic cleaner if so are they any good. Is there a chance of damage to the parts being cleaned?
It would be nice to know the thoughts of anybody who has used one.
Cheers
Peter
1934 Sunbeam model 9 🏍️
1946 Austin 10 🚙